Home / Case studies

Case study · May 2026 · Boulder, CO

Turbo Air reach-in freezer refrigerant leak repair — Boulder

A business in Boulder had a Turbo Air two-door reach-in freezer that was losing refrigerant. The job covered diagnosis, finding the leak, fixing it and testing the system.

Equipment: Turbo Air two-door reach-in freezer with a top-mounted condensing unit

Manifold gauges connected for leak testing

The problem

A freezer that is short on refrigerant slowly loses its ability to hold temperature, and topping it off without finding the leak only buys a few weeks.

On a reach-in, the leak can be anywhere in the tubing, coil or fittings, so it has to be traced before anything is recharged.

What we did

  1. Diagnosed the freezer and connected manifold gauges.
  2. Pressure-tested the refrigeration system to search for the leak.
  3. Inspected the evaporator coil, expansion valve and refrigerant tubing.
  4. Repaired the refrigerant leak.
  5. Tested the system and checked box temperature with an infrared thermometer.
Photos from the job

On site

Result

The freezer was back in service and holding temperature after the leak repair.

Takeaway for operators

With a refrigerant problem, ask whether the leak was found and repaired, not just whether gas was added.

Similar problem with your equipment?

Same- or next-day appointments, written quote before any work, EPA 608 certified technicians.

Request service

Call (720) 534-0432