If your walk-in, reach-ins or ice machine are more than a few years old, there is a good chance they run on R-404A or another high-GWP HFC refrigerant. You may have heard that these refrigerants are being phased out and wondered whether your equipment is now illegal, whether you have to replace it, or whether repairs still make sense.
The short answer: existing equipment can keep running and can keep being repaired. The rules mainly affect new equipment and the supply of refrigerant over time. Here is a plain-language summary based on EPA's own guidance. It is not legal advice, and the rules have been revised more than once, so confirm current requirements before making a major decision.
What the AIM Act does
The American Innovation and Manufacturing (AIM) Act directs EPA to phase down U.S. production and consumption of hydrofluorocarbons (HFCs), the family of refrigerants that includes R-404A, R-134a and many common blends.
According to EPA, the law requires an 85 percent reduction from historic baseline levels by 2036. The phasedown works through allowances that cap how much HFC can be produced or imported each year. The cap steps down over time: 90 percent of baseline for 2020 through 2023, 60 percent for 2024 through 2028, 30 percent for 2029 through 2033, 20 percent for 2034 and 2035, and 15 percent from 2036 on.
Alongside the allowance phasedown, EPA has issued Technology Transitions rules that restrict high-GWP refrigerants in new equipment, and rules aimed at reducing leaks and increasing reclamation of used refrigerant.
Can you keep using and repairing existing equipment?
Yes. EPA states plainly that the Technology Transitions rule does not limit the use of existing products or systems and that there is no requirement to stop using equipment already in service. EPA also says you can continue to repair existing refrigeration systems, and that components for maintenance may continue to be manufactured and imported.
For new field-assembled systems, EPA's sector table notes that components used to repair existing systems are not subject to the new-system restrictions. In practical terms, replacing a failed compressor, fan motor or valve on an existing R-404A walk-in is still a repair, not a new installation.
EPA does caution that the availability of HFCs and components may decrease over time as the phasedown continues. That is the real long-term consideration, not a ban on your current equipment.
What changed for new equipment
The Technology Transitions rules limit the global warming potential (GWP) of refrigerants in new products and systems, with compliance dates that vary by equipment type. EPA's sector table lists, among others:
- Retail food stand-alone units (self-contained reach-ins, merchandisers and similar): GWP limit of 150 for products manufactured or imported on or after January 1, 2025.
- Self-contained commercial ice machines in the smaller size classes: GWP limit of 150 starting January 1, 2026. Larger self-contained machines have certain HFCs, including R-404A, prohibited starting January 1, 2027.
- Remote condensing units, the setup used by many walk-ins: an interim GWP limit of 1,400 for systems installed on or after July 27, 2026, tightening to 150 or 300 (depending on charge size and configuration) on January 1, 2032.
- Cold storage warehouses: an interim limit of 700 from July 27, 2026, tightening to 150 or 300 on January 1, 2032.
- Supermarket systems: an interim limit of 1,400 beginning January 1, 2027, tightening to 150 or 300 on January 1, 2032.
Why the dates moved
EPA's original 2023 Technology Transitions rule set lower limits, including a January 1, 2026 date for remote condensing units. In 2026 EPA finalized a reconsideration of parts of that rule, published in the Federal Register on May 26, 2026 and effective July 27, 2026. That rule created the interim limits above for remote condensing units, cold storage warehouses and supermarket systems, with the original lower limits returning in 2032.
If you read an older article that says remote condensing units must meet a 150 or 300 GWP limit in 2026, it was accurate when written but has been superseded. EPA itself notes that its summary tables are informational and that the regulation text in 40 CFR Part 84 controls.
Leak repair and reclaimed refrigerant
EPA's 2024 Emissions Reduction and Reclamation rule, as summarized in its fact sheet, extends leak repair requirements to appliances with 15 pounds or more of HFC refrigerant with a GWP above 53, starting January 1, 2026. For commercial refrigeration, the leak rate threshold that triggers repair is 20 percent.
The same rule calls for servicing supermarket systems, refrigerated transport and automatic commercial ice makers with reclaimed HFCs starting January 1, 2029.
EPA has received petitions and has been revisiting several HFC rules, so check the current status of these requirements, or ask your service provider, before planning around them.
Repair or replace: how the rules factor in
The regulations alone rarely force a decision. They shift the math. When an R-404A system has a major failure, these questions help:
- How old is the system, and what else is near the end of its life? A new compressor on an old unit with a corroded condenser and failing evaporator fans may only buy a short time.
- Is the failure leak-related? A system that keeps losing refrigerant will cost more over time as HFC supply tightens, and may trigger leak repair obligations if it is large enough.
- Are parts still readily available for your model?
- If you replace, what refrigerant and technology will the new system use, and are your technicians and suppliers equipped for it? Many lower-GWP refrigerants have different handling requirements than R-404A.
- What is the energy use of the old system compared with a new one?
What to avoid
If you are weighing a repair on an R-404A system, ABC Denver Appliance Repair's EPA 608 certified technicians can assess the equipment and explain your options. The service call fee is waived when you approve the repair, and repairs carry a 90-day warranty.
- Do not let anyone 'top off' a leaking system repeatedly without finding the leak. It wastes increasingly expensive refrigerant and may run afoul of leak repair rules.
- Do not convert a system to a different refrigerant without a technician confirming compatibility. Some refrigerants are not drop-in replacements and some are flammable.
- Do not assume you must replace working equipment because of the phasedown. EPA says you do not.