Home / Brands / Garland

Garland · independent service

Garland Commercial Range and Oven Repair in Denver

Garland ranges and convection ovens are workhorses, but a dead pilot, a drifting thermostat or a convection motor that will not spin can stop a station mid-service. ABC Denver Appliance Repair repairs out-of-warranty Garland, Sunfire and US Range ranges, cooktops and ovens for restaurants and commercial kitchens around Denver. Expect a written quote before any work and a 90-day parts-and-labor warranty on the repair.

Commercial service call$129
Waived when you approve the repairWritten quote before any work · same- or next-day appointments · 90-day warranty on parts and labor

4.8 ★  71 Google reviews · EPA 608 certified technicians

Request business service

We reply during business hours (Mon–Sat 7am–7pm · Sun 8am–6pm). Urgent? Call (720) 534-0432.

Same / next-day dispatchPriority slots for contract clients
90-day warrantyOn every repair, parts and labor
Service call waivedWhen you go ahead with the repair
EPA 608 certifiedTechnicians licensed for refrigerant work
Insured, COI on requestReady for vendor onboarding
W-9 & invoicingNet-30 terms for approved accounts
About the equipment

Garland equipment in Denver businesses and homes

Garland is a long-established commercial cooking manufacturer whose roots go back to the 1800s; it is a Welbilt brand, listed today among the Ali Group's brands, with an address in Mississauga, Ontario. Its catalog covers restaurant and heavy-duty ranges, induction units, convection ovens, island suites and countertop equipment, along with broilers, griddles and fryers. Garland also manufactures the Sunfire and US Range brands. We repair Garland ranges, range ovens, cooktops (including hot tops) and convection ovens, but not its fryers, griddles or charbroilers.

Around the Denver metro, Garland and Sunfire restaurant ranges are common on the cooking lines of independent restaurants, bars and cafés, often paired with a standard oven base. Garland Cuisine Series ranges and Master Series convection ovens are more typical in hotel kitchens, institutional cafeterias and catering operations that run equipment for long shifts. Many kitchens also have a Garland or US Range unit that came with the space, so model and serial numbers from the data plate help us identify which line we are working on.

Cuisine Series
A Garland range line aimed at demanding commercial kitchens, which the manufacturer features alongside its Heavy-Duty Counter line.
Master Series MCO Convection Ovens
Garland's Master Series convection oven family, used where ovens run long hours for baking, roasting and banquet production.
Sunfire Restaurant Ranges and Convection Ovens
Sunfire is a Garland-made brand; a Garland spec sheet covers Sunfire Series gas convection ovens in single-deck (SCO-GS-10S) and double-deck (SCO-GS-20S) versions.
US Range
Another brand manufactured by Garland, found on many restaurant ranges and ovens in older and secondhand kitchens.
Starfire Pro Burners
Garland's open-burner design, which the manufacturer lists across several of its range models.
Garland Induction
Garland builds commercial induction cooking units, where repairs center on the electronics, cooling fan and power supply rather than gas parts.
Common problems

Garland problems we diagnose and repair

Gas odor around a Garland range: what to do

If you smell gas, get everyone out, leave lights and switches alone and call the gas utility or 911 once you are outside. When the utility gives the all-clear, we can find out whether a fitting, valve or pilot on the Garland unit was the source and repair it to code.

Garland Starfire burner lighting slowly or popping

A burner that hesitates and then lights with a pop usually has grease in its ports, a dirty standing pilot or a flash tube knocked out of line during cleaning. The technician cleans and realigns the burner parts and checks that each open burner lights smoothly from the pilot every time.

Garland range oven will not stay lit

On standard oven bases, an oven pilot that will not hold is most often a weak thermocouple or a pilot flame that has shrunk because the orifice is partly blocked. We clean the pilot, measure thermocouple output and check the combination safety valve, and replace only what fails testing.

Garland convection oven fan not running

When a Master Series or Sunfire convection oven heats but the fan does not move air, product cooks unevenly or not at all. Typical causes are a failed fan motor, a seized bearing, a bad door switch or a fault in the motor circuit; on many convection ovens the burners will not fire without airflow, so a fan problem can look like a heating problem. We check each in turn.

Garland oven runs hot or cold

A thermostat that has drifted, a failing temperature probe or a control fault can leave a Garland oven 25 to 50 degrees away from the setting. We verify the cavity temperature with a test thermometer, recalibrate where possible and quote a replacement if the control cannot be brought back into range.

Hot top on a Garland range heating unevenly

Hot tops and French tops depend on a clean, correctly adjusted burner underneath the plate. A partly clogged burner, a misadjusted air shutter or a cracked plate gives you a cold ring or patchy heat. The technician inspects the burner and plate and adjusts the flame per Garland's instructions.

Garland induction unit showing an error or not heating

Induction units protect themselves when they overheat or see a problem with the cookware or power supply. A clogged air filter, a failed cooling fan or a faulty power board are common culprits. We check the supply voltage, airflow and electronics, and confirm the pan is induction-compatible before replacing boards.

Under warranty?

A Garland product specification sheet for its Sunfire Series gas convection ovens lists a one-year limited parts and labor warranty and a three-year limited door warranty for the USA and Canada; terms vary by product, so check the documents that came with your unit. If your Garland, Sunfire or US Range equipment is still under warranty, go through Garland and its service network first. ABC Denver Appliance Repair takes care of out-of-warranty repairs once that coverage has ended.

Related services

Keep your Garland running

  • Wipe spills off Starfire Pro and other open burners before they bake on, and soak the burner heads periodically to keep ports clear.
  • Scrape and season hot tops as the manual directs, and avoid flooding them with water, which can crack or warp the plate.
  • Vacuum or wash the air intake filter on Garland induction units regularly so the electronics stay cool.
  • Test convection oven temperature with an oven thermometer on a set schedule, and note how long the oven takes to reach temperature, since a slowing preheat is an early warning.
  • Write down the model and serial number from each Garland, Sunfire or US Range data plate so parts can be identified quickly.

How a service call works

Step 1

Request

Call, text or send the form. Tell us the location and the equipment.

Step 2

Diagnose & quote

A technician arrives same or next day and gives a written quote before any work.

Step 3

Repair & report

You get a photo report and an invoice your office can file the same day.

Garland repair: common questions

Are you an authorized Garland service provider?

No. We are an independent repair company and are not authorized by Garland, Sunfire or US Range. We repair out-of-warranty Garland ranges, cooktops and ovens, and our technicians hold EPA Section 608 certification for refrigerant work, such as on refrigerated range bases. Warranty claims should go to Garland's service network.

Do you work on Sunfire and US Range equipment?

Yes. Both brands are made by Garland, and we repair their ranges, range ovens and convection ovens. We do not repair their fryers, griddles or charbroilers.

Can you fix a Garland induction range?

We diagnose and repair Garland induction cooking units, including cooling fans, filters and the power and control electronics. If a part is only available through the manufacturer, we will tell you before quoting.

Why does my Garland convection oven take longer to preheat than it used to?

Slow preheat usually comes from a worn door gasket, a weak burner or element, a fan that has slowed down, or a thermostat that is cycling off early. We check all four before recommending a part.

ABC Denver Appliance Repair is an independent service company and is not affiliated with, authorized or endorsed by Garland. Brand names are used only to identify the equipment we repair.

Manufacturer references: www.aligroup.com · cdn.beedash.com

Call (720) 534-0432