Home / Locations / Denver / Ice maker repair

Denver, CO · Ice maker repair

Ice maker repair in Denver, CO

No ice, half-formed cubes, a bin frozen into one block, or water dripping into the freezer. We repair refrigerator ice makers and standalone undercounter ice makers across Denver, and most of the time the fix is in the water supply, not the ice maker itself.

Commercial ice machine (Manitowoc, Scotsman, Hoshizaki)? See commercial ice machine repair.

Home service callfrom $59
Credited toward the repair when you go aheadWritten quote before any work · same- or next-day appointments · 90-day warranty on parts and labor

Book ice maker repair in Denver

We reply during business hours (Mon–Sat 7am–7pm · Sun 8am–6pm). Urgent? Call (720) 534-0432.

Same / next-day visitsSeven days a week
90-day warrantyOn parts and labor
From $59Service call, credited with repair
Written quote firstNo work without your OK
InsuredLicensed for refrigerant work (EPA 608)
All major brandsStandard and built-in

Ice makers are one of the most common calls we get in Denver. Over the past two years we've fixed them in GE, GE Monogram, Whirlpool, KitchenAid, JennAir, Samsung, LG, Kenmore, Maytag and Viking refrigerators, and in KitchenAid and GE undercounter units, from Denver and Lakewood to Littleton, Erie and Brighton.

An ice maker needs four things to work: water arriving through the valve and fill tube, a freezer cold enough to freeze it, power and signal reaching the ice maker, and a working ice maker assembly to harvest the cubes. We test each of those in order, so you don't pay for an ice maker when the real problem is a valve or a wire in the door.

No ice

Ice maker not making ice: the water side first

01Water valves

A failed water inlet valve is the single most common reason we find. In Littleton a GE Monogram ran a harvest cycle but the ice maker stayed empty: no water was reaching it. We replaced the inlet valve and the water filter and deep-cleaned the condenser coils. In Longmont a Whirlpool's ice maker and dispenser both quit, and a new water valve fixed both. On a GE French-door in Denver we replaced the double valve assembly together with the ice maker, and on a Viking in Denver where the dispenser only trickled and the ice maker had stopped, the valve assembly and the ice maker assembly were both replaced.

French-door refrigerator in Denver after ice maker and double water valve replacement
French-door refrigerator in Denver after ice maker and double water valve replacement
Viking refrigerator in Denver after water valve and ice maker replacement
Viking refrigerator in Denver after water valve and ice maker replacement
GE Monogram dispenser after the water valve and ice maker were replaced
GE Monogram dispenser after the water valve and ice maker were replaced

02Fill tubes and supply lines

Sometimes the parts are fine and the plumbing isn't. In Denver a Kenmore ice maker that had been replaced a year earlier was freezing up and getting no water: the fill tube had been installed incorrectly and water was leaking into the freezer. We defrosted the ice buildup, cleaned the fill tube and reinstalled the ice maker correctly. In Frederick a leaking ice maker turned out to be a supply hose that wasn't tightly connected, and we installed a proper connector. In Westminster renters had removed an ice maker without shutting off the water; we checked the supply line, installed the owner's new ice maker and replaced the water valve.

Ice maker assembly

When the ice maker itself has failed

03Harvest test failures

Most modern ice makers have a built-in test. If it won't complete the harvest or the water-fill test, the assembly or its wiring is at fault. In Greenwood Village a KitchenAid failed both tests, and we replaced the ice maker assembly and its wire harness. In Lakewood a KitchenAid with no error code still failed the harvest test, and a new ice maker fixed it. We replaced ice maker assemblies on Samsung refrigerators in Aurora and Erie, a JennAir in Louisville that was making ice in big fused blocks, and a GE in Lakewood.

New ice maker assembly in a KitchenAid freezer
New ice maker assembly in a KitchenAid freezer

04High-end built-ins

Built-in refrigerators hide more of the water system behind panels. On the GE Monogram in Littleton, while fixing the ice maker's water supply, we found the water reservoir leaking every time the dispenser ran and replaced it during the same visit. A GE Monogram side-by-side in Littleton with a suspected broken water line needed a new water valve and ice maker.

Built-in GE Monogram refrigerator in Littleton
Built-in GE Monogram refrigerator in Littleton
Freezing up and leaks

Ice maker freezing up, frozen bins and leaks

05Warm air leaks around the ice maker

On Samsung French-door refrigerators the ice maker sits in the fresh-food door, and warm air leaking into its housing freezes it solid. In Boulder and Erie we sealed the ice maker box and replaced the ice maker. In Denver a Samsung that was nearly new only needed the ice defrosted and the gaps around the ice maker box sealed.

06Ice bin frozen into one block

In Lakewood a JennAir's ice bin froze into a solid block every time, so hard it could barely be opened. The ice maker wasn't the cause: the freezer wasn't defrosting. We defrosted the evaporator, replaced the defrost thermostat and fixed the ice maker. If your bin freezes up again and again, ask for the defrost system to be checked.

Power and controls

No power to the ice maker: wiring and boards

07Door wiring and connections

A Maytag owner in Brighton thought the ice maker motor had failed. In fact no power was reaching it: the wiring at the bottom of the door had broken, and repairing it brought the ice maker back. In Centennial a Whirlpool side-by-side ice maker had stopped; we found a bad wire connection and fixed it. On a Whirlpool in Lakewood with damaged door wiring and a damaged internal water line, and no replacement door available, we rebuilt the wiring and water line in the existing door.

Whirlpool side-by-side in Centennial with the ice maker working again
Whirlpool side-by-side in Centennial with the ice maker working again

08Sensor and control boards

In Littleton a refrigerator kept losing its ice maker. We replaced the ice maker sensor control board, repaired the water dispenser and cleaned the condenser coils. In Longmont a Whirlpool's ice maker was fixed with a new control board.

Undercounter ice makers

Undercounter and standalone ice makers

09Slow ice, beeping, no ice

Standalone ice makers live in tight cabinets and pull in kitchen dust, so the condenser clogs and ice production drops. A KitchenAid undercounter in Erie was making very little ice; we cleaned the condenser and the water circulation line and reattached the water supply line. A GE undercounter in Longmont was beeping: we cleaned the condenser and the water tank float and fixed a kinked water supply hose. In Arvada a KitchenAid needed a new recirculation pump, and in Broomfield a Kenmore started making ice again after a condenser coil cleaning.

KitchenAid undercounter ice maker in Erie
KitchenAid undercounter ice maker in Erie
Job records

Recent ice maker repairs in and around Denver

WhereApplianceProblemWhat we did
LittletonGE MonogramHarvest cycle, but no iceReplaced water valve and filter, replaced leaking reservoir
DenverVikingNo ice, dispenser tricklesReplaced water valve and ice maker
DenverGE French-doorNo iceReplaced ice maker and double water valve
LongmontWhirlpoolNo ice or waterReplaced water valve
DenverKenmoreFreezing up, no waterRe-installed fill tube, defrosted, reinstalled ice maker
FrederickRefrigeratorLeaking ice makerInstalled supply hose connector
Greenwood VillageKitchenAidFailed harvest and fill testsReplaced ice maker and wire harness
LouisvilleJennAirIce in big blocksReplaced ice maker
BoulderSamsungIce maker freezing upSealed ice maker box, replaced ice maker
LakewoodJennAirBin frozen solidDefrosted, replaced defrost thermostat
BrightonMaytagNo power to ice makerRepaired door wiring
CentennialWhirlpool side-by-sideIce maker stoppedFixed wire connection
ErieKitchenAid undercounterVery little iceCleaned condenser and circulation line, reattached supply
LongmontGE undercounterBeepingCleaned condenser and float, fixed kinked hose

Problems are described as the customer reported them; repairs are taken from the technician's notes. No customer details are published.

Tips from our technicians

How to avoid the next ice maker repair

Replace the refrigerator water filter on schedule. A clogged filter slows the fill until the ice maker makes tiny or hollow cubes.

If you're going away or moving the fridge, shut off the water at the valve first. We see leaks from ice makers removed with the water still on.

Small, hollow or crescent-shaped cubes usually mean low water flow, not a bad ice maker. Check the filter and the supply valve before buying parts.

If the ice bin freezes into one block again and again, it's often a defrost or door-seal problem, not the ice maker.

Vacuum the condenser on undercounter ice makers a few times a year. They sit in tight cabinets and clog quickly.

Who we are

ABC Denver Appliance Repair is an independent, local repair company. Our technicians are EPA 608-certified, carry common parts on the truck and test every repair before they leave. Every repair comes with a 90-day parts and labor warranty.

Our record in Denver

14 ice makers repaired in Denver

From our job records since 2024 (completed home jobs). No client details are published.

What Denver customers report

Ice maker not working
 11
Noisy
 1

Parts we replaced most

Water inlet valve
 4
Ice maker
 2

Brands we see most

KitchenAid
 2
Kenmore
 1
Viking
 1
JennAir
 1
Samsung
 1

Recent ice maker repairs in Denver

  • August 2026 · Kenmore ice maker — ice maker not working; replaced the water inlet valve
  • July 2026 · Ice maker — ice maker not working; replaced the ice maker
  • July 2026 · Viking ice maker — ice maker not working; replaced the water inlet valve
  • May 2026 · JennAir ice maker — ice maker not working; replaced the ice maker
  • April 2026 · KitchenAid ice maker — ice maker not working; replaced the water inlet valve
  • April 2026 · Samsung ice maker — ice maker not working
  • November 2025 · Ice maker — ice maker not working; replaced the water inlet valve
Local conditions

Ice makers in Denver: water and altitude

With moderately hard water in Denver, undercounter ice machines should be descaled at least as often as the manual recommends, and fridge ice makers benefit from regular filter changes.

Denver's water is moderately hard (about 5.2 grains per gallon). Moderately hard water slowly builds scale in ice maker valves, dishwasher heaters and washer inlet screens. Rinse aid and regular filter changes go a long way.

At about 5,280 feet, water boils about ten degrees below 212°F and recipes behave differently than at sea level. That's normal. What isn't normal is a gas burner with a yellow or lifting flame — that's worth a service call.

Seasonality

When ice makers break in Denver

In our records, the busiest months for ice makers in Denver are April and July; the quietest is September. Booking early in a busy month gets you a faster appointment.

Completed jobs by month, 2024–2026.

JanFebMarAprMayJunJulAugSepOctNovDec
Brands

Ice maker brands we repair in Denver

The brands below are the ones we see most in Denver, in order. We repair all major brands, standard and built-in.

Types

Types of ice makers we service in Denver

Freezer-mounted ice makers

The classic design: an ice maker module in the freezer fills a mold, freezes the water and dumps cubes into a bin. Problems usually come from water supply, freezer temperature or the module itself.

In-door ice makers

Many French-door refrigerators make ice in an insulated compartment in the fresh-food door, cooled by air ducted from the freezer. They depend on seals, fans and ducts that can frost over.

Undercounter ice machines

Standalone residential ice machines make clear ice on a chilled plate or in a grid and harvest it into an insulated bin. They need cleaning and descaling, and some need a drain pump.

Nugget ice makers

Built-in nugget ice machines compress flake ice into soft nuggets. Auger motors, water reservoirs and scale buildup are the common service points.

Problems

Ice maker problems we fix in Denver

Full ice maker repair guide →

No ice at all

We check water supply first: a frozen fill tube, a failed inlet valve, a clogged filter or a shut-off saddle valve. Then the ice maker module, the shut-off arm or sensor, and the freezer temperature — an ice maker won't cycle if the freezer is running warm.

Small, hollow or slow ice

Small or hollow cubes almost always mean the ice maker isn't getting enough water — low house pressure, a filter that's overdue, or a partly clogged valve screen. Hard water speeds that clogging up in many Front Range neighborhoods.

Ice clumped together or dispenser jammed

Clumping usually means ice melted and refroze: the door wasn't sealing, the freezer warmed during a defrost fault, or the dispenser chute flap leaks air. On French-door models with the ice maker in the door, a failing ice-compartment fan or seal is common.

Water leaking from the ice maker

An overfilling ice mold, a cracked fill cup or a valve that doesn't shut fully can drip into the bin and freeze into a block. We fix the cause, not just the ice.

Undercounter ice machine not producing

Standalone ice makers (Scotsman, U-Line, GE Opal, Sub-Zero and others) need regular descaling. Scale on the evaporator plate and water distribution system slows harvest until production stops.

Ice tastes or smells bad

Old ice absorbs odors from the freezer. An overdue filter, a dirty bin or, on undercounter machines, a water system that needs sanitizing are common causes.

Ice maker making a buzzing sound

A buzzing that repeats every cycle is often the water inlet valve trying to fill with no water reaching it — a closed supply valve, a kinked line or a frozen fill tube.

Ice maker overflowing into the bin

A valve that doesn't close fully or a module that doesn't detect a full bin. Ice welded into one block in the bin is a typical sign.

Before you call

  1. Make sure the ice maker is switched on — many have a switch or a wire arm that can get bumped to the 'off' position.
  2. Check the freezer temperature. If it's above about 10°F, the ice maker will wait or produce slowly.
  3. Look at the water filter date. An old filter is one of the most common causes of small or slow ice.
  4. Check that the water supply valve behind the refrigerator or under the sink is fully open and the line isn't kinked.
  5. Break up and remove any clump of ice in the bin or chute; a jam can stop the ice maker from harvesting.

Repair or replace?

Ice maker modules and valves are inexpensive repairs. If the refrigerator itself is old and has other issues, we'll tell you whether the money is better spent on a replacement.

Try our repair-or-replace calculator →

Pricing

What affects the price of ice maker repair in Denver

Service call from $59, credited toward the repair. Written price before any work.

  • Whether the fix is a valve or module, or a fan, seal or defrost fault in the compartment.
  • Whether the line has to be thawed or the compartment defrosted first.
  • For undercounter machines, whether descaling and sanitizing are needed along with the repair.

Keeping your ice maker running in Denver

  • Replace the refrigerator water filter every six months or per the manufacturer.
  • Discard the first few batches of ice after a new filter or a repair.
  • Descale undercounter ice machines per the manual — more often on hard water.
  • Don't leave the ice bin empty for weeks; empty bins can make some sensors misread.

How a home repair visit works

Step 1

Book

Call, text or send the form with the appliance, brand and model if you have it. We give you an arrival window.

Step 2

Diagnose & quote

The technician tests the appliance and gives you a written price before starting. The service call is credited if you go ahead.

Step 3

Repair & warranty

Most repairs are finished on the first visit with parts from the truck. Every repair carries our 90-day warranty.

Ice maker repair in Denver: questions

Why is my ice maker not making ice but the fridge is cold?

Usually water isn't reaching it: a failed water inlet valve, a frozen or misaligned fill tube, or a clogged filter. If water arrives, the ice maker assembly or its power supply is next.

My ice maker makes small or hollow cubes. What's wrong?

Low water flow. Start with the filter. If a new filter doesn't help, the inlet valve or low water pressure is the usual cause.

Why does my ice bin freeze into a block?

Either warm air is leaking into the ice compartment, which is common on French-door refrigerators with door ice makers, or the freezer isn't defrosting properly. Both are repairable.

Should I replace the ice maker or the whole fridge?

Almost never the whole fridge. Ice maker assemblies, valves and fill tubes are routine repairs, usually done in one visit.

Do you repair undercounter ice makers?

Yes. We service KitchenAid, GE and other undercounter ice makers: condenser cleaning, pumps, floats, supply lines and boards. For restaurant ice machines see our commercial ice machine page.

My ice maker is leaking. Is it the ice maker?

Not always. Loose supply connections, a misinstalled fill tube or a leaking reservoir behind the panel can all look like an ice maker leak. We trace it before replacing anything.

Call (720) 534-0432