Home / Guides

Laundry · 12 min read

Washer error codes: what they mean and what to check

We have 180 washer calls in our records where the customer's first words were "it's showing a code." A code is useful, but it isn't a diagnosis. It tells you which system the control board is unhappy with: water in, water out, the door lock, the motor or balance. It doesn't tell you which part failed. A drain code can be a sock in the filter or a dead pump. A fill code can be a closed tap or a failed valve. Here is what the common codes mean, what you can check yourself, and where a technician comes in.

By the ABC Denver service team · Updated November 2026

An error code on a washer display
180washer calls with an error code
131drain pumps replaced
102washer control boards replaced
90 daysparts and labor warranty
Short answer

Most washer codes fall into five groups: water not coming in, water not going out, door or lid lock, unbalanced load, and motor or control faults. Before calling, check that both taps are open, clean the drain filter on a front-loader, redistribute the load, and power the washer off at the plug for one minute. If the same code comes back right away, a part has probably failed.

Five kinds of codes

Washer brands use different letters, but the problems behind them are the same. If you know which group your code belongs to, you know what to check first.

GroupWhat the washer is telling youWhat to check first
FillWater didn't reach the right level in timeTaps open, hoses not kinked, inlet screens clean
DrainWater didn't leave in timePump filter, drain hose, standpipe
Door / lidThe lock didn't lock, or didn't confirm it lockedSomething caught in the door, the latch, the lock
BalanceThe load is too uneven to spinBulky items, single heavy items, leveling, shocks
Motor / controlThe board can't run or sense the motor, or has its own faultPower cycle; repeated codes need testing
An error code on a washer display
An error code on a washer display. Photo from one of our jobs.

LG washer codes

LG is the washer brand we see most, 279 LG washers in our records. LG codes are short and fairly consistent across front-load and top-load models.

CodeMeaningWhat we usually find
OEDrain errorClogged pump filter, kinked hose, failed drain pump
IEFill (inlet) errorClosed tap, clogged inlet screens, failed inlet valve, low pressure
UEUnbalanced loadBulky single item, washer not level, worn shocks or hall sensor
dE / dE1 / dE2Door errorDoor not closed fully, latch or door lock assembly
LELocked motorOverloaded drum, something jammed, motor stator or rotor sensor
FEOverfillInlet valve not closing, pressure sensor problem
PEWater level sensorPressure sensor or its hose
tEHeater / temperatureThermistor or heater circuit on models with a heater
CLChild lock is onNot a fault: hold the child lock button for three seconds
Tech noteAn LG UE that shows up with almost every load, even small ones, is not a user problem. That's usually worn shock absorbers, a failed rotor position (hall) sensor, or a washer that isn't level. Redistributing the clothes won't fix it.

Samsung washer codes

Samsung changed its codes over the years. Older machines show an E as the second character (4E, 5E) and newer ones show a C (4C, 5C). They mean the same thing. We have 195 Samsung washers in our records.

CodeMeaningWhat we usually find
4C / 4E / nFWater supply errorClosed taps, hoses swapped or kinked, clogged inlet screens, inlet valve
5C / 5E / ndDrain errorClogged pump filter, blocked hose, drain pump
UB / UE / UbUnbalanced loadBulky item, washer not level, suspension or shocks
dC / dE / dL / LODoor or lid lockDoor not closed, latch, lock assembly
LC / LEWater level or leakWater in the base, overfill, drain hose siphoning
Sd / SUdSToo many sudsToo much or non-HE detergent; the washer pauses to clear foam
3C / 3EMotor errorOverloaded drum, motor or motor wiring, control
HC / HEHeating errorHeater or its circuit on models that heat water
1C / 1EWater level sensorPressure sensor or its hose
A front-load washer back in service
A front-load washer back in service. Photo from one of our jobs.

Whirlpool, Maytag and other Whirlpool-made washers

Whirlpool, Maytag, Amana and many Kenmore washers come from the same company. Most newer models use the same F-and-E codes. The first number is the group and the second is the specific fault. Some models only show the code in service mode, and some show a short word instead, like "LF" for long fill or "Sud." We have 165 Whirlpool and 128 Maytag washers in our records.

CodeMeaningWhat we usually find
F8E1 / LFLong fillLow water pressure, closed tap, clogged inlet screens, inlet valve
F9E1 / LDLong drainPump filter or coin trap, drain hose, drain pump
F5E1Door or lid switchDoor not closed, switch, wiring
F5E2Door or lid did not lockLock assembly, something in the latch
F5E3Door or lid did not unlockLock assembly; water still in the drum
F7E1Motor speed / driveMotor, drive belt on some models, motor control
F0E5Off-balance loadBulky or heavy item, washer not level
F1E1 / F1E2Control board faultMain control or motor control board
SudExcess sudsToo much or non-HE detergent
An F8 long-fill code on a Whirlpool washer in Denver
An F8 long-fill code on a Whirlpool washer in Denver
A washer drum during a test fill and drain
A washer drum during a test fill and drain

GE and other brands

GE washers don't use one consistent set of codes. Many GE top-loaders show a pattern of flashing lights instead of a code, and many front-loaders only show codes in a service mode. The groups are the same, though: fill, drain, lid lock, balance, motor. With 204 GE washers in our records, we read these on site and test the part before quoting.

Electrolux, Frigidaire and Speed Queen use their own code lists. The model number on the sticker inside the lid or door tells us which list applies. If your code isn't in this guide, send us a photo of the display and the sticker and we'll tell you what it points to. See how to find your model number.

What you can safely do yourself

A lot of codes clear with simple checks. These are safe for anyone to do and don't need tools beyond a towel and a shallow pan.

  1. 1Reset: unplug the washer for one minute. This clears a confused control without hiding a real fault
  2. 2Fill codes: make sure both taps are fully open and the hoses aren't kinked behind the washer
  3. 3Drain codes on front-loaders: open the small panel at the bottom front, drain the water into a pan and clean the filter
  4. 4Drain codes: check that the drain hose isn't kinked and the standpipe isn't overflowing
  5. 5Balance codes: remove a single heavy item (a bath mat, a pair of jeans) or add a few towels to balance it
  6. 6Door codes: open and close the door firmly, and check nothing is caught in the latch
  7. 7Suds codes: run a rinse cycle with no detergent and use less HE detergent next time
Drain filter access on a front-load washer
Drain filter access on a front-load washer. Photo from one of our jobs.

When the code means a part has failed

If you did the checks and the same code comes back on the next cycle, something has likely failed. These are the parts behind the codes in our records:

Code groupParts we replace mostTimes in our records
DrainDrain pump131
Motor / controlControl board102
BalanceShock absorbers70
Fill / overfillWater inlet valve55
Door / lidDoor lock28
MotorDrive belt19
Tech noteDon't replace a control board because of a code. Boards are expensive, and most codes that look like a board failure turn out to be a wiring connector, a motor sensor, or a part the board is reporting on. We test the parts the board depends on first.

Why codes show up more in some homes

Fill codes happen more in homes with old shut-off valves that don't open fully, or where the inlet screens collect scale. That's common in towns with harder water. Drain codes happen more in households with small children (socks, coins, hair ties) and with front-loaders that never get their filter cleaned. Balance codes happen more in basement laundry rooms with sloped floors.

If the same code keeps coming back month after month, look at the habit, not just the washer. A quick filter cleaning every month or two prevents most drain codes.

Getting it fixed

When you call, tell us the code, the brand and, if you can, the model number. That lets us bring the parts that code usually needs. Most code-related repairs are finished in one visit. Book washer repair, or look up other codes in our home error code lookup. If the washer is also leaking, our washer leak guide covers that.

Still not working?

Home service call from $59, credited toward the repair. Same- or next-day visits across the Denver metro.

Call (720) 534-0432

Questions we get about this

Will unplugging the washer clear the code?

It clears the display and resets the control. If the problem is real, the code comes back on the next cycle. That's useful in itself: a code that returns immediately points to a failed part.

What does OE mean on an LG washer?

OE is a drain error. Start by cleaning the pump filter at the bottom front of the washer. If the filter is clean and the code returns, the drain hose or the drain pump is the next step.

Is 4C the same as 4E on a Samsung washer?

Yes. Newer Samsung washers use C where older ones used E. Both mean a water supply problem.

What does F5E2 mean on a Whirlpool or Maytag washer?

The door or lid did not lock. Check for anything caught in the latch. If it keeps happening, the lock assembly usually needs testing or replacement.

Do I need the model number for an error code?

It helps a lot. Codes vary between models of the same brand, and the model number tells us which list and which parts apply.

Call (720) 534-0432